Best 18-Inch Fire Pit Rings for Natural Gas and Propane

The best 18-inch fire pit ring depends on your fuel type, desired flame style, and material preference. The Skyflame 304 stainless steel ring is a strong fit for buyers who want a stated high-flame design, while the Stanbroil stainless steel double ring suits shoppers comparing a high-capacity burner. For propane setups, check whether the selected model requires an air mixer valve before installation.

Product Best For Key Detail
Stanbroil 304 Stainless Steel Double Ring High-capacity setups 147,000 BTU maximum rating
Skyflame 304 Stainless Steel Ring Buyers seeking rust resistance Propane air mixer requirement stated
Stanbroil Black-Painted Steel Ring Cross-bar gas distribution design Propane requires an air mixer valve
Stanbroil High Flame Ring High-flame-style burner design 304 stainless steel construction
Skyflame High Flame Ring Higher stated BTU rating Rated up to 150,000 BTU

Stanbroil 304 Stainless Steel Double Ring

Stanbroil 18-inch stainless steel fire pit burner ring

Check Price on Amazon

This Stanbroil ring measures 18 inches across and has a 1/2-inch center female gas inlet. Its double-ring design has a maximum listed rating of 147,000 BTU. The maker describes the 304 stainless steel construction as suited to heat and severe weather, and says its drilled holes support smoother gas flow and quiet operation.

Best for: Buyers seeking a stainless steel double-ring burner with a clearly stated BTU maximum. The concentric rings are described as helping increase flame height. Check that the gas supply and fire pit design are appropriate for the burner. The listing does not state an air-mixer requirement, so confirm the required propane components before installation if using propane.

Skyflame 304 Stainless Steel Ring

Skyflame 18-inch double-ring stainless steel burner

Check Price on Amazon

Skyflame’s 18-inch double-ring burner is made from 304 stainless steel and has a 1/2-inch NPT inlet in the middle. Its listed maximum rating is 147,000 BTU. The product information describes a three-bar design for natural gas and liquid propane, with propane tips already set up.

Best for: Buyers who prioritize stainless steel construction and want fuel-specific installation details in the listing. Choose this if its stated configuration matches your project. Important limitation: The listing says propane use requires an air mixer valve. Include that requirement in your setup plan and verify the full gas-system configuration before use.

Stanbroil Black-Painted Steel Ring

Stanbroil 18-inch black-painted steel fire ring

Check Price on Amazon

This 18-inch Stanbroil ring uses heavy-duty, warp-resistant steel with high-temperature black paint. It has a 1/2-inch center female gas inlet and a stated maximum rating of 147,000 BTU for its double-ring design. The product description highlights a cross-bar design intended to support gas distribution.

Best for: Buyers who prefer a black-painted steel burner and want the cross-bar design rather than a stainless steel model. It is described for natural gas or propane. Limitation: Propane use requires an air mixer valve, which must be considered alongside the burner when planning the installation.

Stanbroil 18-Inch High Flame Ring

Stanbroil 18-inch high-flame stainless steel burner ring

Check Price on Amazon

This Stanbroil high-flame-style burner measures 18 inches and is made from 304 stainless steel. It has a 1/2-inch center female gas inlet. Its drilled gas holes and concentric ring layout are described as supporting smoother flow and increased flame height.

Best for: Buyers interested in a concentric-ring design intended to create a taller flame. The listing identifies natural gas and propane as fuel options, but does not provide a maximum BTU figure in the supplied details. Confirm the burner’s capacity and the fuel-specific components needed for your installation before choosing it.

Skyflame 18-Inch High Flame Ring

Skyflame 18-inch high-flame stainless steel fire pit ring

Check Price on Amazon

This Skyflame model combines 304 stainless steel with double concentric burner rings and flame-jet outlets. The product description says the jet design compresses gas flow to create a higher, more powerful flame. It has a 1/2-inch NPT high-capacity inlet and a listed maximum rating of 150,000 BTU.

Best for: Buyers comparing high-flame designs who want the highest stated maximum BTU rating among these five listed options. Limitation: The provided features do not specify propane air-mixer requirements. Confirm the fuel configuration and any required components before installation rather than assuming the burner is ready for every gas setup.

Buying Guide: How to Choose an 18-Inch Fire Pit Ring

Which fuel will the burner use?

Start by identifying whether your setup uses natural gas or propane. Do not treat a burner’s fuel compatibility as confirmation that it is ready to connect without additional components. For example, the Skyflame standard ring and the black-painted Stanbroil ring specifically state that propane use requires an air mixer valve. Check the product details and installation requirements for the exact model you choose.

Does the BTU rating fit your project?

Among these listings, stated maximum ratings range from 147,000 BTU for three models to 150,000 BTU for the Skyflame high-flame ring. The Stanbroil high-flame listing does not provide a BTU figure in the supplied features. A maximum rating alone does not determine suitability: compare the burner with the planned gas supply and the fire pit’s design.

Should you choose stainless or painted steel?

The listed stainless steel options use 304 stainless steel, which the manufacturers describe as durable or rust-resistant. The black-painted Stanbroil model instead uses heavy-duty steel with high-temperature black paint. Compare materials and the conditions where the fire pit will be used, but avoid assuming that any material eliminates maintenance needs.

What inlet and design details matter?

These products list a 1/2-inch center inlet, with some specifying a female gas inlet and others a 1/2-inch NPT connection. Verify that the burner connection matches the intended gas-system components. Also compare the designs: double rings, cross bars, concentric rings, and flame-jet outlets are distinct features, not guarantees of a particular flame appearance in every installation.

Frequently Asked Questions

What does an 18-inch fire pit ring measure?

The listed models are described as 18 inches in diameter. Check the product details and your fire pit dimensions to confirm the ring fits the intended space.

Can these fire pit rings use propane?

The supplied listings identify natural gas and propane for several models. Some specify that propane use requires an air mixer valve. Confirm the requirements for the exact burner and setup before buying.

Which listed ring has the highest BTU rating?

The Skyflame high-flame ring has the highest stated maximum in this selection: up to 150,000 BTU. The figure is a listed maximum, not a guarantee of output in every installation.

Are the rings made from the same material?

No. Four listings describe 304 stainless steel construction. The Stanbroil black-painted model is described as heavy-duty steel with high-temperature black paint.